2016.03.23 20:09

Configuration Options for 3D Printing



3dp_auto_placement

creo, by printer *
Defines whether the automatic placement is calculated by Creo or by an external 3D printer.
print3d_min_gap_color
<R value> <G value> <B value>
Defines the color of the highlight for thin walls in the 3D printing printability validation .
print3d_min_gap_tolerance
<value>
Defines the tolerance for the allowed gaps of 3D printing printability validation .
print3d_min_gap_width
<value>
Defines the minimum allowed gaps for 3D printing printability validation .
print3d_min_wall_color
<R value> <G value> <B value>
Defines the color of the highlight for thin walls in the 3D printing printability validation .
print3d_wall_tolerance
<value>
Defines the tolerance for the wall thickness of 3D printing printability validation .
print3d_min_wall_width
<value>
Defines the minimum wall thickness for 3D printing printability validation .
print3d_stl_allow_negative_vals
yes*, no
Sets whether negative values are allowed when exporting to an STL file.
print3d_stl_export_angle
1.000*
Sets the default value of the angle control when exporting an STL file.
print3d_stl_export_chord_height
0.000*
Sets the default chord height when exporting to an STL file.
print3d_stl_export_step_size
-1.00*
Sets the default value of the step size when exporting an STL file. To use the algorithm default, type -1.00.
print3d_stl_export_type
ascii, binary*,
Sets the default format when exporting an STL file.
print3d_stl_prop_chord_height
yes, no*
Sets whether to use proportional chord heights when exporting to an STL file.
print3d_stl_prop_step_size
yes, no*
Sets whether to use proportional step sizes when exporting to an STL file.
print3d_stl_ud_angle
yes, no*
Sets whether to use the user defined angle or the default angle.
print3d_stl_ud_chord_height
yes, no*
Sets whether to use the user defined chord height or the default chord height.
print3d_stl_ud_step_size
yes, no*
Sets whether to use the user defined step size or the default step size.


'All Creo > Creo Parametric' 카테고리의 다른 글

Configuration Options for 3D Printing  (0) 2016.03.23
Posted by 하민아빠 하민아빠